maverick6993
11-07 03:17 PM
I am in Birmingham and would like to join the state cahpter.
wallpaper quotes and famous sayings by
sbabunle
12-17 09:45 PM
Don't be too happy since it moved May 2001 for India. DOS is moving the dates solely based on the demand from the USCIS. They dont know what is DOL cooking ( or they dont care). The BECs have roughly done half of their work. Thats about 180K. Another 180K ( roughly) are pending. So once
they all cleared we may get a better picture of the Plight of EB3 & EB2.
My guess is that anybody who has a PD (India)
Jan 2003-Dec2003 9 years
Jan04-Dec04 12 years
Jan 05 > 15 years
as per present law.
This also underlines the importance of an effective lobbying. We have to make this baby organization to a much stronger one. With lots of dollars and lots and lots of people. In my opinion we should have at least 75K active contributing members.
One good thing is that people who came to US recently ( after 2004) and who apply PERM get things done in 8 months until I140. At I140 they realize they cannot move forward. They are slowly understanding the agonizing situation we are all in. I hope this will eventually turn in more people to immigration voice.
Good luck to all
babu
they all cleared we may get a better picture of the Plight of EB3 & EB2.
My guess is that anybody who has a PD (India)
Jan 2003-Dec2003 9 years
Jan04-Dec04 12 years
Jan 05 > 15 years
as per present law.
This also underlines the importance of an effective lobbying. We have to make this baby organization to a much stronger one. With lots of dollars and lots and lots of people. In my opinion we should have at least 75K active contributing members.
One good thing is that people who came to US recently ( after 2004) and who apply PERM get things done in 8 months until I140. At I140 they realize they cannot move forward. They are slowly understanding the agonizing situation we are all in. I hope this will eventually turn in more people to immigration voice.
Good luck to all
babu
calaway42
10-04 12:03 AM
part where.. "OK HOLD CTRL and click on the layer with your shape on it to select it, now making sure you have the rectangular marquee active on the tools palette, on your keyboard press UP once and LEFT once to offset the selection. Now create a new layer and fill the selection in with white. HOLD CTRL and click on "layer 1" again to select it. With"layer 2" still active HIT DELETE. Now deselect (CTRL +D) now holding CTRL move the highlight of layer to down 2 pixels and right 2 pixels so it look like the image opposite."
2011 legitimately famous people
senthil
02-06 10:59 PM
good question. i guess you were thinking we both were on AOS stage.
only im on adjustment of status, i havent filed for my spouse yet. i got married after reto kicked in. so the only option for her is to stay here is on H4 and to support that I had to stay on H1B, even thou i have EAD.
hope this explains. thanks.
only im on adjustment of status, i havent filed for my spouse yet. i got married after reto kicked in. so the only option for her is to stay here is on H4 and to support that I had to stay on H1B, even thou i have EAD.
hope this explains. thanks.
more...
venky08
10-30 06:15 PM
bump
indianabacklog
07-31 12:28 PM
This is insane and scary at the same time. So, the child will have to depart the US at that time as he will no longer be able to get any valid non-immigrant visa (except probably an H1). As immigration intent has been expressed such a child will not be able to get F-1 visa. I would have to research this further as the prospect of my child having to depart the US after the rest of the family gets a GC is just too much for me to bear at this time! I'll pose the question to my lawyer and hear her opinion.
You can convert from an H4 to an F1. The definition of the F1 is not as strict as you might imagine, hope you do not come to this though.
You can convert from an H4 to an F1. The definition of the F1 is not as strict as you might imagine, hope you do not come to this though.
more...
dummgelauft
04-14 10:04 AM
Umnagini! tough luck man. If this were at-all possible, I would have had my Green card 5 years ago. I have the exact same situation as yours. No, can't do it.
2010 dresses famous love quotes
yabadaba
06-22 02:54 PM
bump up
more...
helmet
06-27 08:54 AM
I have I140 approval notice, Where can I see the A#?
hair Tags: best love quotes,
karl65
10-27 08:46 AM
I got the same response about AP (same RD), approved Oct 17, not received yet.
Please let us know if you receive it. Good luck.
My and my family's APs were approved on Oct 03 (Date issued-according to the NOAs) I received email of approval on Oct 22 and my lawyer received the notification on Oct 25. So be pacient, yours is coming soon.
Good Luck:):):)
Please let us know if you receive it. Good luck.
My and my family's APs were approved on Oct 03 (Date issued-according to the NOAs) I received email of approval on Oct 22 and my lawyer received the notification on Oct 25. So be pacient, yours is coming soon.
Good Luck:):):)
more...
indyanguy
01-13 03:54 PM
I looked at my copy of the packet that was sent to USCIS and yes, it appears that the lawyer did include all the EVLs.
hot Tags: best love quotes,
ssa
11-14 01:51 AM
There is a lot of confusion on this topic - not just on the forums but even among practicing immigration lawyers. Bottom line is there is no clear cut wording in any USCIS rule or memo regarding this particular situation so it's open to interpretation. If your attorney is conservative in interpretation s/he will say use of EAD for any job would void H1B. Others say as long as you do not use EAD for the primary Job for which you have the approved H1B its okay to use EAD for other jobs. My own lawyer is in the later camp - the camp which believes use of EAD for secondary jobs does not constitute violation of H1B terms as long as you continue to work for the H1B sponsoring employer for full time. He is immigration attorney for a very big and prominent high tech company.
Pick one lawyer who you are comfortable with and believe in and do as s/he says. Bad news is anything short of USCIS clarification/memo on this will not end this debate conclusively.
Pick one lawyer who you are comfortable with and believe in and do as s/he says. Bad news is anything short of USCIS clarification/memo on this will not end this debate conclusively.
more...
house regret love quotes Mankind was
idleyogi
06-27 02:22 PM
True, some have had this A# assigned on their I-140 approvals and some don't. Anyone knows what's the significance of this?
A# are like social security numbers for immigration purposes. USCIS assigns you one if you don't have it when they are issuing you an emplyment authorization(EAD, OPT), I-140 etc. They will find the one previously issued for you if you don't fill it in. Although they make every effort to find the one previously assigned to you, you might get assigned more than one A# in rare cases. I am not sure what kind of information is associated with these numbers. I am expecting that our immigration history can be retrieved with these numbers
A# are like social security numbers for immigration purposes. USCIS assigns you one if you don't have it when they are issuing you an emplyment authorization(EAD, OPT), I-140 etc. They will find the one previously issued for you if you don't fill it in. Although they make every effort to find the one previously assigned to you, you might get assigned more than one A# in rare cases. I am not sure what kind of information is associated with these numbers. I am expecting that our immigration history can be retrieved with these numbers
tattoo “Love cures people, both the
astral1977
12-19 12:10 PM
Goel_ar,
Your manner of last entry is the status that you are currently on. Thats a fact.
This is most probably what happened in your case. You were first on H-4, then H-1 got approved in June'08. In the H-1 approval notice, did you get an I-94 attached at the bottom. If yes, then your status changed to H-1 automatically. Now, since you got back into the country in Sept'08 on H-4, it changed back to H-4.
Either you have to go to a consulate aboard and get H-1 stamp and enter using H-1 visa. Or apply for change of status within the country. However, whenever you leave the country, you will have to apply for H-1 visa stamp and use it later to enter.
Hope it helps.
My h1 got approved in june 2008. I did travel to China in September & entered back on Sep 10 using H4. Is it possible that my entry changed my latest status to H4?
Thanks,
LG.
Your manner of last entry is the status that you are currently on. Thats a fact.
This is most probably what happened in your case. You were first on H-4, then H-1 got approved in June'08. In the H-1 approval notice, did you get an I-94 attached at the bottom. If yes, then your status changed to H-1 automatically. Now, since you got back into the country in Sept'08 on H-4, it changed back to H-4.
Either you have to go to a consulate aboard and get H-1 stamp and enter using H-1 visa. Or apply for change of status within the country. However, whenever you leave the country, you will have to apply for H-1 visa stamp and use it later to enter.
Hope it helps.
My h1 got approved in june 2008. I did travel to China in September & entered back on Sep 10 using H4. Is it possible that my entry changed my latest status to H4?
Thanks,
LG.
more...
pictures Famous quotes
p_aluri
04-01 05:38 PM
I am sorry to hear about your situation.
Your attorney may be completly wrong about the labor substitution. The USCIS has passed new rule, The labor will be voided once its passed 180days after approval. So the approved labors from your company has no value.
Did you try utilizing AC21 as your 140 approved and the 180days crossed?
Again I am not a lawyer, please talk to experienced attorneys.
Thank you,
Aluri
Hello folks,
i need some expert opinion here. These are my primary details.
COMPANY A:
1. Perm Labor - Nov 2006. (EB2)
2. I-140 approved - Nov 2007
3. I-485 filed - July 2007.
4 EAD - oct 2007
5 FP - Nov 2007
6 AP - Oct 2007
H1-B extension denied in dec 2007 due to variety of company A issues.
Invoked AC21 yesterday with company B.
COMPANY B: Bought substitution labor of Feb 2004 EB3.
I-140 filed : NSC : paper based filing no documents has been sent waiting for RFE on July 13 2007.
But my labor substitute on 140 has been used for somebody else by mistake and now company B says they have few other labors to substitute and they say we'll respond to the query saying that the original one has been used and please consider the second one. Attorney has made this mistake since many labors were filed at that time and the labor that they have used for me has been approved . Do you guys whatever the attorney is suggesting is going to work? Please let me know i haven't got an RFE yet..
Your attorney may be completly wrong about the labor substitution. The USCIS has passed new rule, The labor will be voided once its passed 180days after approval. So the approved labors from your company has no value.
Did you try utilizing AC21 as your 140 approved and the 180days crossed?
Again I am not a lawyer, please talk to experienced attorneys.
Thank you,
Aluri
Hello folks,
i need some expert opinion here. These are my primary details.
COMPANY A:
1. Perm Labor - Nov 2006. (EB2)
2. I-140 approved - Nov 2007
3. I-485 filed - July 2007.
4 EAD - oct 2007
5 FP - Nov 2007
6 AP - Oct 2007
H1-B extension denied in dec 2007 due to variety of company A issues.
Invoked AC21 yesterday with company B.
COMPANY B: Bought substitution labor of Feb 2004 EB3.
I-140 filed : NSC : paper based filing no documents has been sent waiting for RFE on July 13 2007.
But my labor substitute on 140 has been used for somebody else by mistake and now company B says they have few other labors to substitute and they say we'll respond to the query saying that the original one has been used and please consider the second one. Attorney has made this mistake since many labors were filed at that time and the labor that they have used for me has been approved . Do you guys whatever the attorney is suggesting is going to work? Please let me know i haven't got an RFE yet..
dresses Funny Love Quotes
Lollerskater
09-24 01:34 PM
Sheesh.
I'm a PD: Jun 06 EB3-ROW. I just received 2 yrs EAD. Let's hope this doesn't mean the cutoff dates won't move.
I'm a PD: Jun 06 EB3-ROW. I just received 2 yrs EAD. Let's hope this doesn't mean the cutoff dates won't move.
more...
makeup Romantic Love Quotes
skynet2500
06-22 06:18 PM
IS it possible to send to TSC even though 140 is approved in NSC. Looks like 80 percent of applications go to TSC. Can we even choose where we can send?
girlfriend Famous People Love to Quote
sk8er
04-16 09:04 PM
I cannot read the above post
hairstyles Screenshots: Love quotes
ilwaiting
06-15 03:30 PM
There actually are four separate types of A#. You can tell them apart by the number of digits and the first digit. The first kind is an eight-digit A#. These are manually assigned at local offices. If you have one of these numbers, simply treated it as if it was "0" plus the number. Nine-digit A#'s that start with the digit 1 are used for employment authorization cards, usually related to students. Nine-digit A#'s that start with the digit 3 are used for fingerprint tracking of V visa applicants. All other nine-digit A#'s (these actually always start with a 0) are permanent A#'s and remain permanently with you for life.
Therefore, the rule is: if you are asked for an A# and have one, always give this A#, regardless of whether it starts with a 0, 1 or 3. If you have both a 0-A# and a 1-A# or a 3-A#, then use the one that starts with a 0.
Therefore, the rule is: if you are asked for an A# and have one, always give this A#, regardless of whether it starts with a 0, 1 or 3. If you have both a 0-A# and a 1-A# or a 3-A#, then use the one that starts with a 0.
royus77
05-10 09:45 PM
I took an appointment on friday and its working fine. May be because of the week end some issues with the website. try with IE . by the way VFS/USICS visa procedure is far better than extending your passport . ...
valatharv
07-15 08:33 PM
It will be very nice if anyone of you can help to my post.
"father FirstName and lastName reverse"
"father FirstName and lastName reverse"
No comments:
Post a Comment